KEY FEATURES

STANDARD APPLICATION

Recommended for door types including:

• Sectional Doors (Standard Lift, High Lift and Full Vertical)

• Rolling steel doors/grilles

Standard duty cycle and Extended duty cycle applications where a manual hoist is required

RATED DUTY CYCLE

Standard Duty: Up to 20 cycles per hour and 90 cycles per day

Extended Duty: Up to 30 cycles per hour and 150 cycles per day

OPERATOR SPEED

Average 12″ per second for Sectional doors and 8-9″ per second on Rolling Steel doors

LIMIT SETTINGS

Electronic limits via Floor Level Wall Controller with LCD display

EMERGENCY DISCONNECT FOR MANUAL OPERATION

Operator includes an Engage rope (Green) and a Disengage rope (red) with manual hoist to electrically disable the operator controls

EMERGENCY DISCONNECT WITH AUTO-RECONNECT

Operator includes an Engage rope (Green) and a Disengage rope (red) with manual hoist to electrically disable the operator controls. Pull the engage (green) rope to operate the door again electrically

PROGRAMMING

Floor Level Wall Controller with LCD display to program and commission door

CIRCUIT BOARD

DC Logic Circuit Board

TIMER-TO-CLOSE

Programming through menu on wall controller. Option is available in B2 Mode with two settings. User can select a desired Timer-to-Close (TTC) time duration under that menu

MID-STOP

Program setup under System Configuration Operating Mode, Mid-stop

BATTERY BACKUP

DC7AH: (2) 7 Ah batteries and mounting bracket (optional)

RUN TIME PROTECTION

Standard Duty: 20 Cycle Count and Cycle 21% within a 60 minute threshold

Extended Duty: 30 Cycle Count and Cycle 37% within a 60 minute threshold

MOTOR REVERSE ACTION PROTECTION

Stop Fast: 250ms ramp

Stop Ramp: 500ms-2000ms; Stop button while opening

Emergency (Safety-Chain): CTM trigger immediate stop

MOTOR OPERATOR WALL CONTROLLER

Floor Level Wall Controller with LCD screen using 2 wire interface to connect to powerhead

SPECIFICATIONS

RADIO RECEIVER

LiftMaster Security+ 2.0

VOLTAGE CONNECTIONS

120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via transformer); 600Vac 3PH (via transformer)

ACCESSORY POWER

24Vdc, 1A Auxiliary Output

DRIVE REDUCTION

65:1 Gearbox with #50 Chain Output

BRAKE

Electromechanical for operators that support doors up to 700 and 1200 lbs. Brake is included on 2200 models.

CONSTRUCTION

NEMA 1 type electrical box, heavy duty 11 gauge steel frame with durable powder coat finish. NEMA 4X type electrical box for NEMA 4X rated units

WARRANTY

2 years

INSTALLATION FEATURES

MAXIMUM DOOR WEIGHT

See SKU listing below for maximum door weights allowable by SKU

CONNECTIVITY

WI-FI®

Connect to Wi-Fi via Connectivity option on the wall controller

INTERNET CONNECTIVITY

myQ® technology enables remote monitoring and control via smartphone, tablet, computer. myQ Facility technology enables Diagnostics, absolute cycle count, service cycle count, and remote management

DOOR WEIGHT CHART

SKU	PRODUCT FAMILY	MAX DOOR WEIGHT
JHDC7S1BMC	Hoist	700 lb.
JHDC7S4BMC	Hoist	700 lb.
JHDC12S1BMC	Hoist	1200 lb.
JHDC12S4BMC	Hoist	1200 lb.
JHDC12X1BMC	Hoist	1200 lb.
JHDC12X4BMC	Hoist	1200 lb.
JHDC22X1BMC	Hoist	2200 lb.
JHDC22X4BMC	Hoist	2200 lb.
JHDC12X1N4XMC	Hoist	1200 lb.
JHDC12X4N4XMC	Hoist	1200 lb.
JHDC22X1N4XMC	Hoist	2200 lb.
JHDC22X4N4XMC	Hoist	2200 lb.